Megane 2 1.6 2004

[ronan]

Hi, many regards i read original file with kess on a Renault Megane 1.6 2004 model, save it and write a stage 1 file, car not start anymore and fan starts blowing.
Read with ktag 512 file, find on 7000 start the maps copy paste the original map before i read with kess save it as 512 file and wtite it with ktag.
Same problem car no start anymore and fan blowers...still in programming mode.
Could someone give a full stock file 512kb for Renault Megane 1.6 2004 so as to start the car?
Thank you.

 

[ashley -70057]

Hi. Upload files from kess and k-tag.

 

[ronan]

It's manual transmition with air condition.

 

[ronan]

Hi, thanks for responding. The reading with kess off original file 64kb and with ktag 512kb that i write it's mpc file and i compressed with 7zip so as to upload it.
Megane original.bin

Megane II 1.6 ktag write final 2.7z

 

[ronan]

I forget id reading is
HW: 8200298457
SW: 8200321275
SW upg.: 8200198100

 

[reggie -28109]

У меня все прошивки на Меган весят 1 мегабайт. Бай другой софт машины вряд ли заведется, придется ключи прописывать

 

[ashley -70057]

need files that you read with k-tag after the ecu was bricked

 

[ronan]

Just now find it. I made many readings and i find from older date.
ktag reading 2 8.7z

 

[ronan]

Hi i write it and didn't work.
I tried copy paste from 7000-8000 where it seems to be the maps from another map i found on this forum, but it stills can't start only the fans blowing. If i could find a ready file 512kb, i think on the rest map upwords the 7000 is the issue-maybe corrupt and car doesn't start after trying yours repair and others maps 64kb file copy paste from 7000 and after....